Cabinet installers level and secure kitchen cabinets in a new-build kitchen beside a project schedule and staged cabinet units.

How Long Does Cabinet Installation Take?

Cabinet installation in new construction can take several workdays,…
Homeowner mops ceramic tile with a clean microfiber mop and diluted tile cleaner, with clean water and a soft grout brush nearby.

Best Cleaning Solution for Ceramic Tile Floors

For routine cleaning, the best solution for most ceramic tile…
Carpenter measures surfaced 2-by lumber with a digital caliper to compare actual 1½-inch thickness with the nominal board size.

What Is a 1½-Inch Board in Construction?

In U.S. construction, a board described as 1½ inches thick is…
Tile installer combs thinset on prepared concrete and checks tile layout and floor flatness with a straightedge before setting floor tile.

How to Lay Tile on a Cement Floor

To lay tile on a cement floor, first confirm that the concrete…
Construction coordinator compares a pipe sleeve through concrete with door casing trim to clarify the different meanings of casing out.

Casing Out in Construction: What It Means

“Casing out” in construction can mean different things depending…
Fabricator checks a 45-degree bevel on a stone edge with an angle gauge and ruler before approving the construction trim profile.

Beveled Edge: Definition and Construction Uses

A beveled edge is an edge where one surface is cut or formed…
Tile installer uses a dust-extracted rotary tool with a diamond bit to cut a curved notch around a pipe in secured ceramic tile.

Using a Rotary Tool to Cut Ceramic Tile

A rotary tool fitted with a bit or wheel rated for ceramic tile…
Tile installer positions cement board underlayment over a plywood subfloor beside the thinset and finished tile layers.

What Is Underlayment in Construction?

Underlayment is a layer installed between a structural base and…
Painter applies brick color with a small roller inside a taped running-bond pattern on a smooth wall to create a faux brick finish.

How to Paint a Faux Brick Wall

Painting a faux brick wall creates the visual pattern of brick…
Carpenter uses an adjustable bevel gauge to check an angled trim edge and dry-fit the matching wood piece before cutting.

What Is a Bevel in Construction?

A bevel in construction is an angled edge or surface that is…
A worker vacuums a hardwood floor while another lays taped protective sheets to guard the finish from grit and construction traffic.

How to Protect Hardwood Floors During Construction

Protect hardwood floors during construction by planning the work…
Tile installer checks the straight top edge of ceramic wall wainscoting with a spirit level before finishing the protective lower wall.

Ceramic Tile Wainscoting: Design and Installation

Ceramic tile wainscoting is a tiled finish installed on the lower…